CZ 2075 / Rami Factory Firing Pin Spring
Softer Power Spring.
Use with the Extended Firing Pins for better ignition on hard primers.
and ammunition with hard primers.
CZ 75 & SP01 Shadow Adjustable Rear SightFully Adjustable Rear sight that Fits in the CZ 75 Shadow and CZ 75 SP01 Shadow Factory Rear SightThis is an UPGRADED version of the sight sold on the CZ...
CZ 75 / 85 DisconnectorThis is the standard factory disconnector see part # 10126 if you are looking for the short reset disconnector.
Fully Checkered Coco Bolo THIN Grip Panels
Fits ALL CZ 75 full size series of guns.
Extremely thin, hard wearing, beautiful Coco Bolo grip panels.
Colors vary from redish to dark brown. It's wood, a...
Half Checkered Coco Bolo THIN Grip Panels for the ALL CZ 75 full size series of guns.Extremely thin, hard wearing, beautiful Coco Bolo Grip Panels.Colors vary from redish to dark brown.It's wood...
CZ Factory Sear For B Style Guns, B Style guns have the firing pin blocks installed. This is the NARROWER sear. Fit almost ALL CZ 75 range of pistols.
CZ Competition Rear Sight with 1.0mm Fiber Optic Inserts
for the CZ 75 Rear Sight Cut
This Sight fits in the rear sight notch the CZ 75B
Of the guns we have tested they seem to shoot point of aim...
CZ 75 Extended Ambi Safety Right Hand Side
EXTRA wide serrated paddle, swept back and down. Far easier to activate the safety even for smaller hand (Like Mine).
This safety is applied with...
50B CZ 75 40 S&W Extractor
Fits all CZ 75's / 85's / SP01's / TS / IPSC 40 S&W
1 / 2 DOT ONLY
CZ Extractor Pin
CZ 75 / 85 / Shadow Factory Sear (Pre-B Sear)
This sear can be used in the CZ 75 / 85 to fill the space when removing the firing pin lifter from the sear cage, instead of using the spacer.This is...
Same shape and Size as the THICK skate tape grips, but with a more aggressive pattern.These are 30 line per inch checkering. I call them "The Lemon Graters".Extra Sharp point for those slippery humid...
CZ 75 Full Size GunLanyard (Loop) Mainspring Plug
CZ 75 Kadet Conversion Recoil Guide RodFactory replacement polymer guide rod for 22LR Kadet Kit
Factory magazine release for all new style pistols, i.e. the ones with the hole the same shape on both side of the frame, standard magazine release. Can be used on left side or right side of frame...
D Style EXTENDED Magazine Release
Extended magazine release for all new style pistols,
i.e. the ones with the hole the same shape on both side of the frame.
These are 4.00mm (3/16") longer than...
New Slide Stop For Sp01/75/85
New design to alleviate the problem with 9mm bullets "catching" on the slide stop nub during ejection of partially loaded magazines.
Factory UB Part.
NOT FOR THE CZ...
This pin has three different uses.Hammer to StrutHammer to DisconnectorTrigger to Trigger Bow
This is a CZ UB PRE-B disconnector!!!!!
Recently we acquired some used Pre B CZ 75 pistols, on careful examination we were surprised to see how short the reset (Swing forward) was on the trigger,...
CZ 75 Single Action Trigger Factory Alloy
Factory Aluminum Trigger, With Over Travel Screw
Black Poly Coat
CZ Safety Detent - Spring Style
CZ 75 Safety LH/RH Detent Spring
Thin Paddle Safety Set Right and Left
These are the same safeties as the 2075 Rami but designed to fit on the Full Size CZ 75 SP01 Shadow and 75 Shadow Models ONLY.
SOLD AS A SET ONLY
Wider Paddle Style Has the longer protruding knub (that hits the magazine follower for Slide lock back).This is the factory version that is fitted to Shadow SP01.
CZ 75 Slide Stop Spring Pin
SP01 Factory Magazine Spring.Made for the 17 Round Magazines, may need to be trimmed for 10 round magazines.
CZ 75 SP01 Safety LHS D StyleThis is the style that uses the larger hole in the right hand side of the frame On the right side it looks like a D This is NOT the CZ 75B SA Style Safety!!! Can be...
CZ SP01 Polymer Guide RodThese guide rods will not work with the SP01 Flat Wire recoil spring #30033. The will work with the standard recoil springs.åÊ
CZ 75 Tactical Sport Ejector
CZ 75 Trigger Bow Factory
CZ Magazine Brake Pin (TOP)New Improved Trigger Pin
This pin will work with all CZ 75 Models Including Compacts, SP01, Shadow, Tactical Sports Etc.
This new pin is thicker on one side only, therefore...
CZ75 Tactical Sports Spring Mag FACTORY
FACTORY Tactical Sports Magazine Spring Hi Capacity Magazines only.
ONLY FOR THE TACTICAL SPORTS. WILL NOT WORK IN 75 / 85 Magazines.
CZ 75 Adjustable Rear Sight and Front sight set (fiber optic 9.5mm) A adjustable rear sight and front fiber optic front sight set for the 75 rear dovetail. This will fit the 75B, 85B, SP01, P01...
1 Pair Grip Screws for CZ 75/85 SP01 etc....These are Stainless Steel with Philips head and are shipped with lock washers.This is the same as the factory screws only in stainless steel.
CZ 75/85 SP01 Slide Stop Spring (Factory)
CZ 75/85C/ Shadow & TS Firing Pin (ATM)
New Extended Firing Pin for better ignition.
For CZ guns with Firing pin plate retention NOT Cross pin .
Use in combination with CZ 2075 Factory Firing...
CZ Spring Main / Hammer 11 Lb GreyFITS All CZ (Except P10C)Used in conjunction with the CZ Custom Hammer to create unbelievably good DA SA trigger pulls. CZ Compact pistols use a shorter Spring Plug...
Reduced Power Mainspring for CZ 75/85åÊPistol
Used in conjunction with the CZ Custom Hammer to create unbeliveably good DA SA trigger pulls. No longer neccessary to cut coils with this light weight...
CZ CustomAll CZ Models (Except P10c & Rami)Main Spring Calibration KitKit contains main / hammer springs from 10lbs to 16lbs these springs can be used adjust the double-action trigger weight...
CZ Spring Main / Hammer 13 Lb PurpleFITS All CZ (Except P10C)Used in conjunction with the CZ Custom Hammer to create unbelievably good DA SA trigger pulls. CZ Compact pistols use a shorter Spring...
Extra power extractor springs are available for the CZ-75/85 series pistols - all calibers. 25% stronger than factory springs.
We have never found it necessary to use these in 9mm...
50A CZ 75 9mm Extractor
Fits all CZ 75's / 85's / SP01 / TS / IPSC 9MM
3 DOTS / New Style
52A CZ Factory Extractor SpringsExtractor springs are available for the CZ-75/85 series pistols - all calibers.
Factory Hammer Strut for CZ 75/85 SPO1 & Shadow
Magazine Catch Release Spring
CZ 75/85/SP01 Main/Hammer Spring Factory
Reduced Power Recoil Spring for CZ Full Size GunsMay need to be cut shorter for Older CZ 75's
CZ Trigger Bar Lifter Spring
New trigger return spring for the CZ 75 / 85 range of pistols.
These newly re designed spring have been made from a better grade of spring steel heat treated differently and tested by us.
All Models Excluding Rami