Noisefighters - Gel Ear Pads with Relief Cuts for Glasses

New for 2018! First ever gel earmuff pads with relief cuts for glasses to pass through without breaking the seal and causing headaches. Best results with straight-style glasses arms, and our super-soft silicone gel produces an amazing seal with other types of glasses arms.

Our unique horseshoe-ring shaped double-hump front face and 1/4" inch of silicone gel provide significantly better softness and sealing vs. competitors' pads.

When headset is lowered as much as possible, glasses arms can be dropped into relief cuts and will sit in a protected channel just above the ear. Using the relief cuts is completely optional. Our gel pads also work like normal without glasses.

Use of super-premium acoustic memory foam and a closed head seal leads to impressively better sound deadening that is immediately noticeable to even the most casual user.

Made in the USA by a USMC veteran-owned company and designed for use in any climate. Polyurethane outer skin is UV-resistant, waterproof, and much longer-lasting than vinyl used on cheap pads. These gel pads are tough.





Compatibility

Adhesive Universal Mount:

Howard Leight® Impact® Sport (including Bolt® version)

Howard Leight® Impact® Pro

Howard Leight® Leightning®

Howard Leight® Sync®

Howard Leight® Viking®

 

3M™ Peltor™ RangeGuard™

3M™ Peltor™ Sport Tactical 100

3M™ Peltor™ Sport Tactical 300

3M™ Peltor™ Sport Tactical 500

Caldwell® E-Max (standard and low-profile)

Mpow® Noise Reduction Safety Ear Muffs

NoiseBuster® PA4000, PA4100, PA4200

Pro Ears® - inspect your existing pads and see if they are held on with adhesive; if so, our design will mostly likely fit (the pad profile is 4 in / 102 mm long, 3 in / 77 mm wide, and 0.625 in / 15.875 mm thick; the inner opening is 1.75 in / 44 mm wide and 2.75 in / 70 mm long)

Radians® - inspect your existing pads and see if they are held on with adhesive; if so, our design will mostly likely fit (the pad profile is 4 in / 102 mm long, 3 in / 77 mm wide, and 0.625 in / 15.875 mm thick; the inner opening is 1.75 in / 44 mm wide and 2.75 in / 70 mm long)

Winchester® Passive Folding Earmuffs / Low Pro Passive Folding Earmuffs

3M Peltor Mount

The snap-in plate used on this model is an exact clone of the 3M HY80 plate. If your headset is not listed but is still compatible with the HY80, then it is guaranteed compatible with our model.

-- DOES NOT FIT 3M™ PELTOR™ SPORT TACTICAL 100 / SPORT TACTICAL 300 / SPORT TACTICAL 500. PLEASE PURCHASE OUR "ADHESIVE UNIVERSAL MOUNT" INSTEAD --

3M™ Worktunes™ (yellow and black model; uncertain compatibility with other versions at this time)

3M™ Peltor™ ComTac™ II/III/XPI

3M™ Peltor™ Shotgunner™

3M™ Peltor™ Sound-Trap™

3M™ Peltor™ Sport™

3M™ Peltor™ SportTac™

3M™ Peltor™ SWAT-Tac™ II/III

3M™ Peltor™ Tactical 6-S

3M™ Peltor™ TacticalPro™

3M™ Peltor™ Tactical Sport™

Racing Electronics® Platinum Plus headsets

Walkers Game Ear Mount

Walker's Game Ear® Razor™ Series (all versions compatible, including COMM BT)

Walker's Game Ear® Ultimate Power Muff (including Quad version)

Walker's Game Ear® Ultimate Quad Connect

Walker's Game Ear® Ultimate Digital Quad Connect

Walker's Game Ear® Ultimate Digital Quad 4x4

MSA Sordin Mount

Invisio® T5 (please transfer o-ring from original pads onto our pads if applicable)

MSA® Sordin® Supreme™ (please transfer o-ring from original pads onto our pads if applicable)

TCI® Liberator™ II / III / DEHP™ / HP™ (please transfer o-ring from original pads onto our pads if applicable)