Product Description
The New RT1500 Electric Case Trimmer is designed to handle the heaviest trimming jobs, including converting 223 Remington into 300 AAC Blackout. Makes short work out of trimming large quantities of brass.
The RT 1500 is used just like a standard size die. The big difference is that while you are pushing the case into the die to size it, a 1/4 horsepower electric motor driving a carbide cutter is trimming the case to length. Chips are drawn off through a vacuum manifold that clamps to the outside of the special size/trim die. (Vacuum cleaner and hose not included.) Outside diameter of manifold as 1.250"
The RT1500 is equipped with a quick-disconnect power cord; and it can be used on any standard reloader, single stage or progressive.
(available only in 110 volt /60 hz.)
Size/trim dies are sold separately.Case lube must be used.
Replacement Carbide Cutting Blades, stock#13141
.All the electrical/electronic components of Dillon equipment are covered by a one-year warranty from date of purchase.
This unit has a one-year warranty.
In order to trim 300 AAC Blackout, you must be aware of the following:
You MUST use the RT1500 trimmer
You MUST use the Dillon XL650 Short Trim Die Toolhead #62112 or 1050 Short Trim Die Toolhead #62219 or RL550 Short Trim Die Toolhead #62231
You must use the Dillon Carbide 300 AAC Blackout Trim Die #62140
The RT 1500 is used just like a standard size die. The big difference is that while you are pushing the case into the die to size it, a 1/4 horsepower electric motor driving a carbide cutter is trimming the case to length. Chips are drawn off through a vacuum manifold that clamps to the outside of the special size/trim die. (Vacuum cleaner and hose not included.) Outside diameter of manifold as 1.250"
The RT1500 is equipped with a quick-disconnect power cord; and it can be used on any standard reloader, single stage or progressive.
(available only in 110 volt /60 hz.)
Size/trim dies are sold separately.Case lube must be used.
Replacement Carbide Cutting Blades, stock#13141
.All the electrical/electronic components of Dillon equipment are covered by a one-year warranty from date of purchase.
This unit has a one-year warranty.
In order to trim 300 AAC Blackout, you must be aware of the following:
You MUST use the RT1500 trimmer
You MUST use the Dillon XL650 Short Trim Die Toolhead #62112 or 1050 Short Trim Die Toolhead #62219 or RL550 Short Trim Die Toolhead #62231
You must use the Dillon Carbide 300 AAC Blackout Trim Die #62140
Product Videos
Custom Field
Product Type Reloading Components
Size Default
